01235 856 367
Call our Sales Team Mon - Fri (9am - 5.30pm)
Contact Us  |  My Account  |  Basket Contents  |  Checkout  |  Blog   
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
Shop By Manufacturer »
Shop By Categories

Bathroom Engineering Mainstream DECO 'M' Shower Channel inc. Waterproofing - 1000mm

583.63 - INC VAT

Bathroom Engineering Mainstream DECO 'M' Shower Channel inc. Waterproofing - 1000mm

A complete kit of parts needed to build a wet room shower comprising a universal lightweight floor module, waterproofing system & linear show channel. Pre-coated with a 'polycement' waterproof finish, modules are used instead of levelling compounds to build floor gradients quickly to a consistent level so they channel water towards the linear shower channel drain that is set into the floor. Waterproofing kit ensures that there would be no leaks in the wet room shower & simplify fitting to suit DIY installers.


A comprehensive kit combines popular sizes of DECO 'M' floor drain, eForm 22 floor modules & enough waterproofing membrane required to build a wet room shower with a linear floor drain and waterproof it. The kit includes following elements that together result in a high quality shower structure that is ready to tile:

  1. A shower floor module (eForm22T) with a flat gradient along the upper side, that can be cut & trimmed to suit site conditions & the floor gully supplied. To be fully supported & fitted into a sub-floor recess, the module cuts time by creating a consistent gradient at the right angle
  2. Polymer sheet waterproofing membrane, creates a barrier, protecting wall & floor from water damage

Individual instructions for each component are included, to simplify the installation process


With a MAINSTREAMT DECO 'M' kit, you can build the key structure for a wet room shower floor, waterproof & seal it so it's prepared for a tiled floor to be laid. Suits:

  • En-suites & Designer Bathrooms : When linear floor gully's are needed to minimalise tile cuts
  • Refurbishments & New Build projects : All project types
  • Floor & Wall Structures : Universal - all floor structures, but best for timber over joist floors


  • Material :304 high quality stainless steel, ABS trap
  • Size Channel, Standard : 600, 800, 900, 1000mm
  • Visible Size : 34mm shorter than stated size e.g. 600 is 566 mm visible
  • Gully Profile : 18mm Cross Section, to suit common UK floor structures
  • Waste & Foul Air Trap : Outlet DN 50mm, EN1253-2, with BS2" connection
  • Waterproofing : Factory fit sealing collar to support flange
  • Suitable Floor Covering : Natural Stone or Tile up to 12mm thick


  • Material : Polyethylene 2x non-woven outer layers
  • Thickness : approx 0.4mm
  • Weight : 290 g/m2
  • Size (Main Membrane) : 1000mm wide roll, 5m long
  • Ancilliaries - Joints : incl. 10m long joint tape & internal corner
  • Temperature Stability : -30C / +90C
  • Adhesion : Common cementitious (powder) tiles adhesive, both sides


  • Shower Tray - Material : Min. 60 grams/litre high pressure & temp. pressed EPS
  • Size - Overall Width : 1000 x 1000, to be trimmed on site
  • Profile (Cross Section) : 8/22mm tray module
  • Gradient : 1.4% leading towards one side
  • Coating : Mineral polycement, with 5mm polymer reinforcing mesh
  • Tile Size (suggested) : Generally min. 100 x 100mm, smaller with care / re-enforcement
  • Fixing : Common cementitious (powder) tile adhesive, or sand / cement


  • Packaging should be disposed of according to local bylaws.


  • Separate Sheet : Included in Packages


  • Floor module : Cardboard box
  • Waterproofing : Wrapped, loose
  • Floor Gully Drain : Cardboard box


  • DECO 'M' Shower Gully, Grate, & Trap Horizontal DN 50mm Outlet rotates 360 degree
    • Waterproof Sealing Gasket - fitted on all four sides to flanges
    • Installation Feet (concrete floors), & Earthing Tag
  • eForm22T shower floor module to suit length of floor drain
  • AquaeGUARD 5+10 waterproof membrane tanking kit
Bathroom Engineering Mainstream DECO \'M\' Shower Channel inc. Waterproofing - 1000mm
Click image to enlarge
Product Dimensions
Click image to enlarge
Deco M Channel Drain
Click image to enlarge
Product Information:
Product Price: 583.63 - INC VAT
Product Model: 099 00088
Manufacturer: Bathroom Engineering
Delivery Cost: 6.98
Delivery Time:1-2 Working Days
Follow us for great deals
Catalogue RSS Facebook Group Follow Bathroom2u on Twitter for offers and news Follow Bathroom2u on Google+ for our latest deals Find Bathroom2u on Pinterest 
Shopping Basket »
0 items
New Products »
Deva 1 1/4" slotted press top basin waste
Deva 1 1/4" slotted press top basin waste
11.48 - INC VAT
Recently Viewed
01.Bathroom Engineering Mainstream DECO 'M' Shower Channel inc. Waterproofing - 1000mm
Tell A Friend
Tell someone you know about this product.
Dramco Limited is registered in England and Wales as a Company | Registration Number:- 05193915 | VAT Number:- 838082121
© 2018 Dramco Limited. All Rights Reserved.