Bathroom Engineering Mainstream DECO 'M' Shower Channel inc. Waterproofing - 900mm
A complete kit of parts needed to build a wet room shower comprising a universal lightweight floor module, waterproofing system & linear show channel. Pre-coated with a 'polycement' waterproof finish, modules are used instead of levelling compounds to build floor gradients quickly to a consistent level so they channel water towards the linear shower channel drain that is set into the floor. Waterproofing kit ensures that there would be no leaks in the wet room shower & simplify fitting to suit DIY installers.
PRODUCT CHARACTERISTICS
A comprehensive kit combines popular sizes of DECO 'M' floor drain, eForm 22 floor modules & enough waterproofing membrane required to build a wet room shower with a linear floor drain and waterproof it. The kit includes following elements that together result in a high quality shower structure that is ready to tile:
- A shower floor module (eForm22T) with a flat gradient along the upper side, that can be cut & trimmed to suit site conditions & the floor gully supplied. To be fully supported & fitted into a sub-floor recess, the module cuts time by creating a consistent gradient at the right angle
- Polymer sheet waterproofing membrane, creates a barrier, protecting wall & floor from water damage
Individual instructions for each component are included, to simplify the installation process
APPLICATIONS
With a MAINSTREAMT DECO 'M' kit, you can build the key structure for a wet room shower floor, waterproof & seal it so it's prepared for a tiled floor to be laid. Suits:
- En-suites & Designer Bathrooms : When linear floor gully's are needed to minimalise tile cuts
- Refurbishments & New Build projects : All project types
- Floor & Wall Structures : Universal - all floor structures, but best for timber over joist floors
TECHNICAL DATA - LINEAR GULLY
- Material :304 high quality stainless steel, ABS trap
- Size Channel, Standard : 600, 800, 900, 1000mm
- Visible Size : 34mm shorter than stated size e.g. 600 is 566 mm visible
- Gully Profile : 18mm Cross Section, to suit common UK floor structures
- Waste & Foul Air Trap : Outlet DN 50mm, EN1253-2, with BS2" connection
- Waterproofing : Factory fit sealing collar to support flange
- Suitable Floor Covering : Natural Stone or Tile up to 12mm thick
TECHNICAL DATA - WATERPROOFING
- Material : Polyethylene 2x non-woven outer layers
- Thickness : approx 0.4mm
- Weight : 290 g/m2
- Size (Main Membrane) : 1000mm wide roll, 5m long
- Ancilliaries - Joints : incl. 10m long joint tape & internal corner
- Temperature Stability : -30C° / +90C°
- Adhesion : Common cementitious (powder) tiles adhesive, both sides
TECHNICAL DATA - SHOWER TRAY
- Shower Tray - Material : Min. 60 grams/litre high pressure & temp. pressed EPS
- Size - Overall Width : 1000 x 1000, to be trimmed on site
- Profile (Cross Section) : 8/22mm tray module
- Gradient : 1.4% leading towards one side
- Coating : Mineral polycement, with 5mm polymer reinforcing mesh
- Tile Size (suggested) : Generally min. 100 x 100mm, smaller with care / re-enforcement
- Fixing : Common cementitious (powder) tile adhesive, or sand / cement
DISPOSAL
- Packaging should be disposed of according to local bylaws.
INSTALLATION INSTRUCTIONS
- Separate Sheet : Included in Packages
PACKAGING
- Floor module : Cardboard box
- Waterproofing : Wrapped, loose
- Floor Gully Drain : Cardboard box
CONTENTS
- DECO 'M' Shower Gully, Grate, & Trap Horizontal DN 50mm Outlet rotates 360 degree
- Waterproof Sealing Gasket - fitted on all four sides to flanges
- Installation Feet (concrete floors), & Earthing Tag
- eForm22T shower floor module to suit length of floor drain
- AquaeGUARD 5+10 waterproof membrane tanking kit
|
