Bathroom - Bathroom Suites, Showers and Baths from Bathroom2U.com

Moods Space Saver Shower Bath 1695 x 695mm - RH - 2TH

Includes:

Bath
Front Panel
Screen

Bath Info:

1695 x 695mm
Large end 695mm
Small end 500mm
750mm at widest point
2 Tap Holes

Screen Info:

W900 x H 1400mm
5mm Toughened safety glass
Pivots 180 for ease of cleaning
Raise and fall hinges
20mm adjustment for out of true walls

** Please note end panel is not included, please select below if required.

Moods Space Saver Shower Bath 1695 x 695mm - LH - 2TH

Includes:

Bath
Front Panel
Screen

Bath Info:

1695 x 695mm
Large end 695mm
Small end 500mm
750mm at widest point
2 Tap Holes

Screen Info:

W900 x H 1400mm
5mm Toughened safety glass
Pivots 180 for ease of cleaning
Raise and fall hinges
20mm adjustment for out of true walls

** Please note end panel is not included, please select below if required.

Moods Designer L Shape Shower Bath 1675 x 700mm - RH - 2H

Includes:

Bath
Front Panel
Screen

Bath Info:

90mm Deep Back Edge
75mm Deep End/Front Edge
850mm Widest Point
2 Tap Holes

Bath Screen Info:

815w x 1400h mm
5mm toughened safety glass
Pivots 180 degrees for ease of cleaning
20mm adjustments for out of true wall

** Please note end panel is not included, please select below if required.

Moods Designer L Shape Shower Bath 1675 x 700mm - LH - 2H

Includes:

Bath
Front Panel
Screen

Bath Info:

90mm Deep Back Edge
75mm Deep End/Front Edge
850mm Widest Point
2 Tap Holes

Bath Screen Info:

815w x 1400h mm
5mm toughened safety glass
Pivots 180 degrees for ease of cleaning
20mm adjustments for out of true wall

** Please note end panel is not included, please select below if required.

Moods Luxury Shower Bath 1675 x 750mm - RH - 2H

Includes:

Bath
Front Panel
Screen

Bath Info:

1675 x 750mm
850mm at widest point
2 Tap Holes

Bath Screen Info:

760w x 1500h mm
6mm toughened safety glass
Pivots 180 degrees for ease of cleaning
Rise & Fall Hinges
20mm adjustments for out of true wall

** Please note end panel is not included, please select below if required.

Moods Luxury Shower Bath 1675 x 750mm - LH - 2H

Includes:

Bath
Front Panel
Screen

Bath Info:

1675 x 750mm
Total Height (Inc Screen): 2040mm
850mm at widest point
2 Tap Holes

Bath Screen Info:

760w x 1500h mm
6mm toughened safety glass
Pivots 180 degrees for ease of cleaning
Rise & Fall Hinges
20mm adjustments for out of true wall

** Please note end panel is not included, please select below if required.

Flex Tape 120 x 10mt

Internal Corner 140 x 140 x 120

Merlyn Vivid Bifold Door - 900mm

Features:

1850mm High (Excluding Trays)
4mm Toughened Safety Glass
Magnetic Closure
CE Approved
Power Shower Compatible
Wetroom Compatible

Merlyn Vivid Bifold Door - 800mm

Features:

1850mm High (Excluding Trays)
4mm Toughened Safety Glass
Magnetic Closure
CE Approved
Power Shower Compatible
Wetroom Compatible

Merlyn Vivid Bifold Door - 760mm

Features:

1850mm High (Excluding Trays)
4mm Toughened Safety Glass
Magnetic Closure
CE Approved
Power Shower Compatible
Wetroom Compatible

Merlyn Vivid Bifold Door - 700mm

Features:

1850mm High (Excluding Trays)
4mm Toughened Safety Glass
Magnetic Closure
CE Approved
Power Shower Compatible
Wetroom Compatible

Merlyn Vivid Sliding Door - 1200mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
Magnetic Closure
CE Approved
Power Shower Compatible
Wetroom Compatible
Quick Release Runners for Ease of Cleaning

Merlyn Vivid Sliding Door - 1000mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
Magnetic Closure
CE Approved
Power Shower Compatible
Wetroom Compatible
Quick Release Runners for Ease of Cleaning

Merlyn Vivid Pivot Door - 900mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
Magnetic Closure
CE Approved
Power Shower Compatible
Wetroom Compatible

Merlyn Vivid Pivot Door - 800mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
Magnetic Closure
CE Approved
Power Shower Compatible
Wetroom Compatible

Merlyn Vivid Pivot Door - 760mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
Magnetic Closure
CE Approved
Power Shower Compatible
Wetroom Compatible

Merlyn Vivid Pivot Door - 700mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
Magnetic Closure
CE Approved
Power Shower Compatible
Wetroom Compatible

Merlyn Vivid 2 Door Offset Quadrant - 1200 x 900mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
550mm Radius
Power Shower Compatible
Wetroom Compatible
Magnetic Closure
CE Approved
Quick Release Runners for Ease of Cleaning

Merlyn Vivid 2 Door Offset Quadrant - 1200 x 800mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
550mm Radius
Power Shower Compatible
Wetroom Compatible
Magnetic Closure
CE Approved
Quick Release Runners for Ease of Cleaning

Merlyn Vivid 2 Door Offset Quadrant - 1000 x 800mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
550mm Radius
Power Shower Compatible
Wetroom Compatible
Magnetic Closure
CE Approved
Quick Release Runners for Ease of Cleaning

Merlyn Vivid 2 Door Offset Quadrant - 900 x 760mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
550mm Radius
Power Shower Compatible
Wetroom Compatible
Magnetic Closure
CE Approved
Quick Release Runners for Ease of Cleaning

Merlyn Vivid Double Door Quadrant - 900mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
550mm Radius
Power Shower Compatible
Wetroom Compatible
Magnetic Closure
CE Approved
Quick Release Runners for Ease of Cleaning

Merlyn Vivid Double Door Quadrant - 800mm

Features:

1850mm High (Excluding Tray)
6mm Toughened Safety Glass
550mm Radius
Power Shower Compatible
Wetroom Compatible
Magnetic Closure
CE Approved
Quick Release Runners for Ease of Cleaning

External Corner 140 x 140 x 120

e-Form 22 Model V Universal Shower Floor Gradient, 1000 x 1000mm

A universal lightweight shower tray & floor module made from HardCORET60, that is used to build structural elements of a shower in suspended timber (UK style) or concrete floors. Trim-able to match all LINEAR SHOWER CHANNELS or FLOOR DRAINS, they've a factory fit 'polycement' waterproof coating, and are used instead of levelling compounds to build a 2x way floor gradient to a consistent level.

Shower tray / module with a flat & level underside, & a flat 2x way gradient at 1.4% along the upper sides. Can be trimmed to suit local site conditions and cut to allow channels / floor drains to match. To be fully supported across the full surface, & fitted into sub-floor recesses using tile adhesive, they require subsequent sealing / tanking with commonly available & approved materials. Used to form gradient that leads to the cornerm.

Shape : 2x way wedge, HardCORET floor module, c/w 1.4% flat gradient
Colour : Dark grey polycement, with solid HardCORET 60 in White
Coating : Polycement, factory coated on all sides c/w reinforcing Mesh

APPLICATIONS

Domestic Residential Wet Room Showers
All Standard floor structures incl.

Timber Suspended (UK style)
Concrete screed
...all other common floor structures

Create slopes or GRADIENTS for Linear Floor drains or Gully's
Refurbishments & New Build projects
Suitable for Internal or External Use

TECHNCAL DATA

Width Overall : 1000 mm
Length : 1000 mm
Thickness : 22 mm, reducing to 8mm, in 1x corner, with diagonal valley
Gradient : Flat (not concave) 1.4% on 2x sides to a single corner
Tolerance : +0mm / -2mm generally

MATERIAL

Floor Module : Min. 60 grams/litre high pressure & temp. pressed EPS
Coating : Mineral Polycement
Reinforcement : Full width, with 5mm gap Polymer Mesh

TILES

Fixing : Cementitious flexible tile adhesive (powder)
Tile size (recommended) : 100mm x 100mm minimum
Min. Tile size (Domestic use) : 25mm x 25mm (mosaic, absolute minimum)
Min. Tile size (Institutional use) : 50mm x 50mm, wheelchair access (mosaic, absolute minimum)

PHYSICAL VALUES

Single Point Load (Hardness) :TBC (Rockwell, Brinell, Vickers, Knoop, Shore Hardness)

DISPOSAL

Packaging should be disposed of according to local bylaws.

INSTALLATION INSTRUCTIONS

Suitable for use with common sealing products such as PCI Lastogum , AquaeSEAL RP etc.
Fixed with all common cementitious (powder) tile adhesives or solvent free adhesives
Non structural element that requires support across full underside

PACKAGING

Floor Element : Cardboard Box
Instructions : Loose within packaging

INTELLECTUAL PROPERTY

This product is protected under European Community Design Registration Nr. 001230478.

SPECIFICATION CLAUSE

eForm22 Model 'V' Universal low profile 'V' directional shower floor gradient in high pressure moulded HardCORET 60 pre-formed with a 1.0% fall (22mm > 8 mm) to one corner, fitting fully supporting sub-floor recesses, 1000 x 1000mm

e-Form 22 Model D Universal Shower Floor Gradient, 700 x 1000mm

A universal lightweight shower tray & floor module made from HardCORET60, in 2x pieces, that are used to build structural elements of a shower in suspended timber (UK style) or concrete floors. Trim-able to match all LINEAR SHOWER CHANNELS or FLOOR DRAINS, with a factory fit 'polycement' waterproof coating, and are used instead of levelling compounds to build floor gradients quickly to a consistent level.

Shower tray / module used to create the correct floor gradient into floors when building level access wet room type showers. Supplied in 2x pieces, with a flat level underside, & a flat gradient along the upper side, the modules can be fitted together or cut to suit site conditions & to allow fitting to all shower gully channels or floor drains. To be fully supported across the full surface, & fitted into sub-floor recesses using tile adhesive (or other non solvent containing adhesives), they have a waterproof coating but require subsequent edge sealing and matching to surrounding tanking with commonly available & approved materials.

Shape : Wedge shaped HardCORET floor form, with 1.4% flat gradient
Colour : Dark grey polycement, with solid HardCORET 60 in White
Coating : Polycement, factory coated on all sides c/w reinforcing Mesh

APPLICATIONS

Domestic Residential Wet Room Showers
All Standard floor structures incl.

Timber Suspended (UK style)
Concrete screed
...all other common floor structures

Create slopes or GRADIENTS for linear floor drains or shower gully's
Refurbishments & New Build projects
Suitable for Internal or External Use

TECHNCAL DATA

Width Overall : 700 mm
Length : 1000 mm
Thickness : 22 mm, reducing to 6mm
Gradient : Flat (not concave) 1.4%, consistent across full width
Tolerance : +2mm / -0mm generally

MATERIAL

Floor Module : Min. 60 grams/litre high pressure & temp. pressed EPS
Coating : Mineral Polycement
Reinforcement : Full width, with 5mm gap Polymer Mesh

TILES

Fixing : Cementitious flexible tile adhesive (powder)
Tile size (recommended) : 100mm x 100mm minimum
Min. Tile size (Domestic use) : 25mm x 25mm (mosaic, absolute minimum)
Min. Tile size (Institutional use) : 50mm x 50mm, wheelchair access (mosaic, absolute minimum)

DISPOSAL

Packaging should be disposed of according to local bylaws.

INSTALLATION INSTRUCTIONS

Suitable for use with common sealing products such as PCI Lastogum , AquaeSEAL RP etc.
Fixed with all common cementitious (powder) tile adhesives or solvent free adhesives
Non structural element that requires support across full underside

PACKAGING

Floor Module : Cardboard Box
Instructions : On box label & loose within packaging

SPECIFICATION CLAUSE

eForm22 Model 'D' Universal low profile single direction shower floor gradient in high pressure moulded HardCORET 60 pre-formed with a 1.4% fall (22mm > 8 mm) to one end, fitting fully supporting sub-floor recesses, 700 x 1000mm

e-Form 22 Model C Universal Shower Floor Gradient, 350 x 1000mm

e-Form 22 Model C, Universal Shower Floor Gradient, 350 x 1000mm

A universal lightweight shower tray & floor module made from HardCORET60, that are used to build structural elements of a shower in suspended timber (UK style) or concrete floors. Trim-able to match all LINEAR SHOWER CHANNELS or FLOOR DRAINS, with a factory fit 'polycement' waterproof coating, and are used instead of levelling compounds to build floor gradients quickly to a consistent level.

Shape : Wedge shaped HardCORET floor form, with 1.4% flat gradient
Colour : Dark grey polycement, with solid HardCORET 60 in White
Coating : Polycement, factory coated on all sides c/w reinforcing Mesh

APPLICATIONS

Domestic Residential Wet Room Showers
All Standard floor structures incl.

Timber Suspended (UK style)
Concrete screed
...all other common floor structures

Create slopes or GRADIENTS for linear floor drains or shower gully's
Refurbishments & New Build projects
Suitable for Internal or External Use

TECHNCAL DATA

Width Overall : 350mm
Length : 1000mm
Thickness : 22 mm, reducing to 6mm
Gradient : Flat (not concave) 1.4%, consistent across full width
Tolerance : +2mm / -0mm generally

MATERIAL

Floor Module : Min. 60 grams/litre high pressure & temp. pressed EPS
Coating : Mineral Polycement
Reinforcement : Full width, with 5mm gap Polymer Mesh

TILES

Fixing : Cementitious flexible tile adhesive (powder)
Tile size (recommended) : 100mm x 100mm minimum
Min. Tile size (Domestic use) : 25mm x 25mm (mosaic, absolute minimum)
Min. Tile size (Institutional use) : 50mm x 50mm, wheelchair access (mosaic, absolute minimum)

DISPOSAL

Packaging should be disposed of according to local bylaws.

INSTALLATION INSTRUCTIONS

Suitable for use with common sealing products such as PCI Lastogum , AquaeSEAL RP etc.
Fixed with all common cementitious (powder) tile adhesives or solvent free adhesives
Non structural element that requires support across full underside

PACKAGING

Floor Module : Cardboard Box
Instructions : On box label & loose within packaging

SPECIFICATION CLAUSE

eForm22 Model 'C' universal low profile single direction shower floor gradient in high pressure moulded HardCORET 60 pre-formed with a 1.4% fall (22mm > 8 mm) to one end, fitting fully supporting sub-floor recesses, 350 x 1000mm

e-Form 22 Model B Universal Shower Floor Extension, 500 x 1000mm

PRODUCT CHARACTERISTICS

Shape : Wedge shaped HardCORET floor form, with 1.4% flat gradient
Colour : Dark grey polycement, with solid HardCORET 60 in White
Coating : Polycement, factory coated on all sides c/w reinforcing Mesh

APPLICATIONS

Domestic Residential Wet Room Showers
All Standard floor structures incl.

Timber Suspended (UK style)
Concrete screed
...all other common floor structures

Create slopes or GRADIENTS for linear floor drains or shower gully's
Refurbishments & New Build projects
Suitable for Internal or External Use

TECHNCAL DATA

Width Overall : 1000 mm
Length : 500 mm
Thickness : 30 mm, reducing to 22mm
Gradient : Flat (not concave) 1.6%, consistent across full width
Tolerance : +2mm / -0mm generally

MATERIAL

Floor Module : Min. 60 grams/litre high pressure & temp. pressed EPS
Coating : Mineral Polycement
Reinforcement : Full width, with 5mm gap Polymer Mesh

TILES

Fixing : Cementitious flexible tile adhesive (powder)
Tile size (recommended) : 100mm x 100mm minimum
Min. Tile size (Domestic use) : 25mm x 25mm (mosaic, absolute minimum)
Min. Tile size (Institutional use) : 50mm x 50mm, wheelchair access (mosaic, absolute minimum)

DISPOSAL

Packaging should be disposed of according to local bylaws.

INSTALLATION INSTRUCTIONS

Suitable for use with common sealing products such as PCI Lastogum , AquaeSEAL RP etc.
Fixed with all common cementitious (powder) tile adhesives or solvent free adhesives
Non structural element that requires support across full underside

PACKAGING

Floor Module : Cardboard Box
Instructions : On box label & loose within packaging

SPECIFICATION CLAUSE

eForm22 Model 'B' Universal low profile single direction shower floor gradient in high pressure moulded HardCORET 60 pre-formed with a 1.6% fall (30mm > 22 mm) to one end, fitting fully supporting sub-floor recesses, 500 x 1000mm

e-Form 22 Model A Universal Shower Floor Gradient,1000 x 1000mm

PRODUCT CHARACTERISTICS

Shape : Wedge shaped HardCORET floor form, with 1.4% flat gradient
Colour : Dark grey polycement, with solid HardCORET 60 in White
Coating : Polycement, factory coated on all sides c/w reinforcing Mesh

APPLICATIONS

Domestic Residential Wet Room Showers
All Standard floor structures incl.

Timber Suspended (UK style)
Concrete screed
...all other common floor structures

Create slopes or GRADIENTS for linear floor drains or shower gully's
Refurbishments & New Build projects
Suitable for Internal or External Use

TECHNCAL DATA

Width Overall : 1000 mm
Length : 1000 mm
Thickness : 22 mm, reducing to 6mm
Gradient : Flat (not concave) 1.4%, consistent across full width
Tolerance : +2mm / -0mm generally

MATERIAL

Floor Module : Min. 60 grams/litre high pressure & temp. pressed EPS
Coating : Mineral Polycement
Reinforcement : Full width, with 5mm gap Polymer Mesh

TILES

Fixing : Cementitious flexible tile adhesive (powder)
Tile size (recommended) : 100mm x 100mm minimum
Min. Tile size (Domestic use) : 25mm x 25mm (mosaic, absolute minimum)
Min. Tile size (Institutional use) : 50mm x 50mm, wheelchair access (mosaic, absolute minimum)

PHYSICAL VALUES

Single Point Load (Hardness) :TBC (Rockwell, Brinell, Vickers, Knoop, Shore Hardness)

DISPOSAL

Packaging should be disposed of according to local bylaws.

INSTALLATION INSTRUCTIONS

Suitable for use with common sealing products such as PCI Lastogum , AquaeSEAL RP etc.
Fixed with all common cementitious (powder) tile adhesives or solvent free adhesives
Non structural element that requires support across full underside

PACKAGING

Floor Module : Cardboard Box
Instructions : On box label & loose within packaging

SPECIFICATION CLAUSE

eForm22 Model 'A' Universal low profile single direction shower floor gradient in high pressure moulded HardCORET 60 pre-formed with a 1.4% fall (22mm > 8 mm) to one end, fitting fully supporting sub-floor recesses, 1000mm x 1000 mm