Standard single pumps are ideal for boosting the water pressure and flow in vented systems. They may be used to:
- Boost the water pressure in either the hot or cold water supply.
- Boost the blended water outlet between the shower valve and the shower rose.
Not suitable for pumping water supplies to common mixers.
Technical Specification
The Pump
- Inlet strainer
- Stuart hard face mechanical seal
- Flow switch sensitivity approx. 0.6 l/min
- Max. inlet head 14 metres
- Plumbing connection G ¾ " male
- Flexible hose G ¾ " female x 22 mm push-in c/w isolating valves x 305 mm long
- Anti vibration feet
The Motor
- Power Supply 230/1/50
- Enclosure rating IPX4
- Motor Induction type, permanent capacitor, auto resetting protective thermotrip
- Power consumption 435 Watts
- Full load 2.4 Amps
- Fuse rating 5 Amps
- Pre wired
- Rating Continuous (S1) @ 9 l/min and above
|
