The Varme Mat system is similar to the Varme Cable, except that the cable comes already taped to a 50cm wide fibreglass mesh.
The main advantage with this design being that makes it much faster to lay out in larger 'open plan' areas when compared to the cable system.
Installation is simple, the mat is simply rolled out onto the existing sub-floor or insulation boards & when the opposite wall is reached the mesh is cut & the mat rolled back in the opposite direction.
When the mat is in place, the release paper on the double sided tape is peeled back & the mat is then pressed to the primed floor to hold it in place for tiling.
Varme Mat systems come complete with:
- Heating cable supplied woven to a self adhesive mesh.
- Fully programmable thermostat controller with floor probe.
- Floor primer.
- Roller for primer.
- Simple installation instructions.
- Manufacturers Ten Year Warranty.
Varme Mat 150 systems come in a standard 150w per sqm for all internal rooms.
See Varme Mat 200 for conservatories & other areas of high heat loss.